My Account  |  0 item(s)    View Cart
PAINT MASK SET for the 350 Scale TOS ENTERPRISE Shuttle Bay Landing Floor
Each set come with two complete mask sets and a master mask.

PAINT MASK SET for the 350 Scale TOS ENTERPRISE Shuttle Bay Landing Floor

Your Price:$8.95
Retail Price:$9.95
You Save:$1.00(10%)
In Stock. 4
Part Number:IN0486

Feature:

Masks are created upon order. Please allow three to four days for production before shipping. Thank you.

Feature:

Model kit not included.

Feature:

The use of painting masks is considered an advance modelling skill and may require practice to master.
PAINT MASKS for the 350 Scale TOS ENTERPRISE SHUTTLE BAY LANDING FLOOR 

What do you get?  You get two complete floor masking sets plus one master mask with the set.  One set serves as a backup just in case you need an extra mask.  You also get several pieces of transparent transfer tape to transfer the mask from the backing to the model part.   Or, given the small size of the mask it is possible to place the mask parts by hand without the use of the transfer tape.  The option for placement is your choice based upon your skills.  

The masking set is made up of:
  • One master mask
  • One rectangle mask
  • One circle mask
  • One line mask
You will can either apply by hand or with the transfer tape.  You use the tape by applying the tape to the mask and then rub the tape down where the is not bubbles or spaces left.  You then use the tape to pull the mask off the backing material by pulling back the tape over itself very slowly to make sure the mask comes of onto the tape.  Sometimes you’ll have to push the tape back down and rub the transfer tape back onto the mask.  This may take several tries to get it right. You then apply the mask on the tape to the kit part and rub the tape/mask down until there is no air voids left.  Then slowly peel the tape off leaving the mask on the part.  This can take several tries to get the mask to set.  Peel slowly, rub back down, peel, rub, peel until you can remove the tape with the mask left on the kit part. 


The use of painting masks is considered an advance modelling skill and may require practice to master.

Paint Mask Instruction Video:  Please watch the instruction video on installing the Refit shuttle bay mask on how to use the transfer tape.  The process is the same for this masking set for each of the three masks used to paint the floor markings on the kit part for the TOS Shuttle Bay Floor.  

You can access the video on our product instruction page which can be viewed here:

REFIT SHUTTLE BAY PAINT MASK INSTRUCTIONS 

Related Items

Recently Viewed Items