This kit is designed to mimic the timed lighting of the Refit in the first Star Trek the Movie. TenaControls Brings Models to Life. Add life to your Star Trek Enterprise 1701-A as well as other space ship models. All the connections to this boards are made to the Screw Down Terminal Blocks. This is why we say this is the complete board. The board is designed to provide all the Navigation Lighting, all the Strobe Lighting, the Navigational Deflector Dish, Impulse Crystal, Impulse Engine, Landing Bay Sequential Landing Lights and the Nacelle Chiller Grills.
How this board functions: On power up the Navigation Lighting, Strobe Lighting and Landing Bay Sequential Landing Lights will come on. Press the Manual momentary switch and Navigational Deflector Dish will ramp up Amber to 50% power wait ten seconds and ramp to 100% power, wait ten more seconds and the Amber will start to ramp off while simultaneously the Blue will ramp up to 100% power. Press the Manual momentary switch again and the Impulse Crystal and Impulse Engines will Ramp Up Amber and stay that way, press the Manual momentary switch again and Impulse Crystal and Impulse Engines will Ramp off at this point in time the Nacelle Chiller Grills will come full on, press the Manual momentary switch again and Nacelle Chiller Grills will go off and the Impulse Crystal and Impulse Engines will Ramp Up Amber and stay that way, press the Manual momentary switch again and Impulse Crystal and Impulse Engines will Ramp off, press the Manual momentary switch again and Navigational Deflector Dish will ramp off. The Navigation Lighting, Strobe Lighting and Landing Bay Sequential Landing Lights will remain on.
One additional feature which is way cool, is the Demo Mode Switch. Press this momentary switch at anytime to place this control into an automatic mode. The first thing you’ll see, all the controlled features will turn off, then one by one they will come as stated above.
The Combo-MVE is powerful, yet small enough to fit just about anywhere you feel comfortable placing it inside the ship.
The Photon Torpedo is not included in the Combo-MVE board, however, the Photon Torpedo board is sold separately.
As always, TenaControls uses commercial grade components in all our controls for reliability and longevity. That is why we can offer a 5 Year Warranty for your peace of mind.
- One (1) fully assembled board (1 5/8 inch x 1 1/2 inch)
- Two (2) momentary switch
- One (1) 9 volt battery clip
- Seventeen (17) 3mm White LED's
- Two (2) 3mm Green LED's
- Two (2) 3mm Red LED's
- Three (3) 5mm Amber LED's
- One (1) 5mm Bi-color LED
- Two (2) Blue LED Strips for Chiller Grills
- Wiring and shrink tubing for the LED's
- Thirteen (13) resistors
- Wiring Instructions
- Best warranty in the business - 5 Year Warranty
- Made in the USA
Important: No interior or window lighting supplied with this kit. This board will also work on 12 volt DC supply.
(model kit not included)