This is Tenacontrols Second Generation control board for the Franklin NX-326. This is a fully integrated remote control and lighting system all one board with more current capability then the previous one. You can turn on/off any ONE of the lighting functions like the Navigation, Impulse Engines, Thrusters, Internal Lighting and Bussards individually or turn them ALL on/off. You will also have the ability to Speed up or slow down the Bussard Effect. TenaControls uses the best commercial grade components in the manufacturing of all our controls.
Before shipping, each board is Digitally set in software to the correct time sequence, for the most accurate setting. This board and the remote control receiver board are small enough to fit nicely within the model. The only wires that come out of the ship are the Two power wire. How cool is that?
Items included:
Two (2) Orange Wired SMD
One (1) Control/Remote Control board with two Bussard Boards
One (1) 4 Button Transmitter
One (1) Three feet of White LED Strips for Internal Lights
Two (2) White 5 mm LED as emitters for fiber optic strands, see above
Two (2) Orange 5 mm LED
One (1) Green Wired SMD
One (1) Red Wired SMD
Two (2) Resistors
Instruction manual
Wiring for the LED's
Shrink tubing
5 Year Warranty
Made in the USA
Important: This board will work on 9 or 12 volt DC supply.
Note: Tenacontrols does not provide the fiber optic strands needed for some small illumination areas. They leave this up to the individual modeler to use what ever size they prefer.
NOTICE: This Tenacontrol product may not be combined with any other item on the site in your shopping cart. All Tenacontrol FX products must be ordered by themselves. If you would like additional items, please place them in a separate order or you will not be able to check out. All Tenacontrol products are shipped separately from all other products due to insurance requirements.